Step 1: Turn on the iVape Vaporizer

Turn on the iVape Vaporizer and wait for it to reach it’s set temperature. Usually a little over half way is a good setting to start at.

Step 2: Pack the iVape Vaporizer

Now pack your grounded herb into the bowl piece of the glass wand. Like most vaporizers, the iVape Vaporizer recommends that you only fill the bowl piece about 1/3 of the way so you don’t waste any herb.

Step 3: Attach the vapor whip to the iVape Vaporizer

Now attach the vapor whip to the metal heating element putting the end with the herb packed into it on the heating element.

Step 4: Begin use of the iVape Vaporizer

This begins the vaporization process. Draw as much vapor from it as is comfortable for you and continue throughout the session. The temperature should stay the same throughout to ensure your vaporizing experience doesn’t change.

Step 5: Refill the iVape

Once the herb is kicked, simply take the whip off with another twisting motion and discard the herb. Replace the herb with freshly ground herb and repeat the previous steps.

If you haven’t read the review for the iVape Vaporizer you can find it here. Still not sure the iVape is for you? Compare prices and vendors for the iVape Vaporizer.

0
Ease Of Use
0
Design/Build
0
Performance
0
Efficiency
0
Vapor Quality
Users (0 votes) 0
What people say... 0 Leave your rating

Be the first to leave a rating.

Leave your rating


Related posts:

A Review Of The ThermoVape T1 Vaporizer