Step 1: Turn on the Myrtlezap Vaporizer

First you want to plug in the Myrtlezap, simply put the A/C adapter plug in the back of the vape and plug the other end into the wall. The cord for this vape is pretty long and skinnier than most, but definitely not fragile.

Step 2: Heat up the Myrtlezap Vaporizer

You have to give the Myrtlezap about 30 to 45 minutes to heat up the first time, but you can leave it on after that for as long as you like so it isn’t a big concern. Once you’ve heated it for 45 minutes, to be safe, you can fill one of the short nylon stems.

Step 3: Pack the Myrtlezap Vaporizer

Take one of the nylon stems provided and place the herb bowl end over your ground up herb. Now pull the herb into the herb chamber by gently pulling from the mouthpiece end. Once you see it filled with herb take the small packing tool they give you and lightly pack the herb into the chamber. Just don’t push too hard.

Step 4: Attach the nylon stem to the Myrtlezap Vaporizer

Now place the herb end on top of the Myrtlezap. The herb end will fit nicely on the top leaving the mouthpiece end pointing straight upwards.

Step 5: Being use of the Myrtlezap Vaporizer

Next you’ll want to take the Myrtlezap in hand and lift it up and pull from the mouthpiece end of the nylon stem. You should be able to get at least 3 to 4 big hits and then a couple clearing hits from each bowl pack.

If you haven’t yet read our extensive review of the Myrtlezap Vaporizer you can find it here. Want to purchase this vape? Before you do compare prices and vendors for the Myrtlezap Vaporizer.

Ease Of Use
Vapor Quality
Users (0 votes) 0
What people say... 0 Leave your rating

Be the first to leave a rating.

Leave your rating

Related posts:

A Review Of The ThermoVape T1 Vaporizer