Step 1: Turn on the Vapir Classic
First press the on button to turn on the vaporizer. On the front you’ll see the digital temperature read out with the plus and minus buttons. Set the Vapir Classic to your desired temperature to have it start heating up.
Step 2: Pack the Vapir Classic
Now grind up your herb and open the front disc drawer and remove the bowl piece. Place the herb evenly over the bowl piece and put the disc back into the drawer and close the little hatch on it. Make sure you don’t put too much in because not only will you be wasting herb, but it can cause the Vapir Classic to overheat.
Step 3: Attach the Vapir Classic whip
Now make sure you put the plastic tubing whip onto the top. After that turn on the fan of the Vapir Classic by pressing the heat button and the vaporization process will begin. This will also make the vapor begin to come out.
Step 4: Begin use of the Vapir Classic
Begin to draw from the whip. The fan on the Vapir Classic delivers vapor pretty slow but it is a nice pace.
Step 5: Refill the Vapir Classic
Once you are finished you can open the herb chamber hatch again and use the little tweezers to remove the herb disc. Discard the vaporized herb and replace with fresh herb. Repeat the previous steps until done.
Tip: Using the whip plastic tubing extension is a must. It helps cool the vapor and makes it much smoother.
If you haven’t read the review of the Vapir Classic Rechargeable Vaporizer then you must need to recharge your brain! You can find it here. Wanna see how much this vaporizer costs? Compare prices and vendors for the Vapir Classic.
Be the first to leave a rating.