Step 1: Turn on the Vaporfection JR

First plug in and turn on the Vaporfection JR. Turn the temperature control knob up to high and make sure you push in the knob to turn off the green light on the LED, the green light signals that the vape is in standby mode.

Step 2: Heat up the Vaporfection JR

The glass heating element can heat up in as little as two minutes, but in most cases it will take around four minutes to heat up. When it is all ready to go the LED tube will start to light up different colors and you’ll hear the fan kick on.

Step 3: Pack the Vaporfection JR

Now load up your grinded herb into the glass whip above the screen. Make sure you don’t fill above the screen any more than 1/3 of the way up, because at that point you will be wasting herb.

Step 4: Begin use of the Vaporfection JR

Next put the whip into the glowing glass LED tube hole and begin to inhale slowly for about ten seconds and then at a faster steady pace for about eight seconds. What you want to do from here is start to turn the temperature knob down slowly between pulls to reach your preference of taste. The lower you set it the more taste you are likely to get.

Step 5: Refill the Vaporfection JR

When done simply refill the herb chamber or put the red power switch to the off setting and the Vaporfection JR will begin to automatically cool itself off. When the Vaporfection JR has reached room temperature it will completely shut itself off just like it’s digital version. This is really convenient and a welcome addition.

If you haven’t read the review of the JR Digital Stealth II well the review isn’t so hidden. You can find it here. Thinking about buying this vaporizer? Compare prices and vendors for the Vaporfection JR first!

0
Ease Of Use
0
Design/Build
0
Performance
0
Efficiency
0
Vapor Quality
Users (0 votes) 0
What people say... 0 Leave your rating

Be the first to leave a rating.

Leave your rating


Related posts:

A Review Of The ThermoVape T1 Vaporizer