Step 1: Turn on the Vapormatic Deluxe
First you want to turn the Vapormatic Deluxe on and set the LED temperature display to your desired temperature. The LED will initially be lit up red but once your desired temperature is reached it will turn green and that means you’re ready to vaporize.
Step 2: Pack the Vapormatic Deluxe
After the LED on the Vapormatic Deluxe has turned green you should have ground your herb by now. Pull the little tray in the upper left hand corner of the vape out to expose the herb tray. Fill the tray evenly with herb and place it back into the slot.
Step 3: Attach the Vapormatic Deluxe whip or balloon
Next decide whether you will be using either the provided whip, or a balloon to inhale. If whip simply place the hose at the top of the Vapormatic Deluxe and if balloon attach one of the provided balloons to the top.
Step 4: Begin use of the Vapormatic Deluxe
Now slowly draw from the whip, adjusting the fan speed as necessary to find the level of fan speed that is most comfortable for you. If using a balloon just detach the balloon when full and pull intermittently.
Step 5: Refill the Vapormatic Deluxe
Once finished you can remove the tray revealing the herb disc. Take that out using the tweezers they provide to you as the herb disc is going to be pretty hot. Now just repeat the last steps until done.
Tip: I found that the balloon inflating method of vaporizing delivered a much better experience than direct inhalation through a vapor whip with this vaporizer.
If you haven’t read the review of the Vapormatic Deluxe I may or may not be mad at you. You can find it here. Thinking about buying this vaporizer? Compare prices and vendors for the Vapormatic Deluxe first!
Be the first to leave a rating.