Step 1: Turn on the Voodoo Mystifire

First you want to turn the Voodoo Mystifire on and set the LED temperature display to your desired temperature. The LED will initially be lit up red but once your desired temperature is reached it will turn green and that means you’re ready to vaporize.

Step 2: Pack the Voodoo Mystifire

After the LED has turned green you should have ground your herb by now. Pull the little tray in the upper left hand corner of the Voodoo Mystifire out to expose the herb tray. Fill the tray evenly with herb and place it back into the slot.

Step 3: Attach the Voodoo Mystifire whip or balloon

Next decide whether you will be using either the provided whip, or a balloon to inhale. If whip simply place the hose at the top of the Voodoo Mystifire and if balloon attach one of the provided balloons to the top.

Step 4: Begin use of the Voodoo Mystifire

Now slowly draw from the whip, adjusting the fan speed as necessary to find the level of fan speed that is most comfortable for you. If using a balloon just detach the balloon when full and pull intermittently.

Step 5: Refill the Voodoo Mystifire

Once finished you can remove the tray revealing the herb disc. Take that out using the tweezers they provide to you as the herb disc is going to be pretty hot. Now just repeat the last steps until done.

Tip: Like with the Vapormatic Deluxe I found that the balloon inflation was much more pleasant than the vapor whip.

If you haven’t read the review of the Voodoo Mystifire then I might be forced to use some voodoo on you. You can find it here. Thinking about ordering this vaporizer? Before you order the Voodoo Mystifire, compare prices and vendors!

Ease Of Use
Vapor Quality
Users (0 votes) 0
What people say... 0 Leave your rating

Be the first to leave a rating.

Leave your rating

Related posts:

A Review Of The ThermoVape T1 Vaporizer